What we repair.

  • Heat pumps — ducted and ductless, all major brands.
  • Air conditioners — central AC and condensers.
  • Gas furnaces — ignition, heat exchanger, blower, and control issues.
  • Ductless mini-splits — Mitsubishi and other brands.
  • Thermostats, airflow & controls — when the comfort problem isn't the equipment itself.

We install Mitsubishi Electric and American Standard and know those lines cold, but we diagnose and repair most major brands.

Common problems we fix.

  • AC blowing warm air — anything from a tripped breaker to low refrigerant. See the five common causes.
  • No heat — failed ignition, bad capacitor, control board, or a heat pump stuck in defrost.
  • Short cycling — the system turns on and off too often, usually a sizing, airflow, or sensor issue.
  • Strange noises or smells — grinding, rattling, or burning that shouldn't be there.
  • Weak airflow or high bills — often airflow, refrigerant charge, or a failing component.

Same-day & emergency service.

When it's a true no-heat or no-cool emergency, we prioritize same-day service whenever our schedule allows. Peak Care members get first priority in the dispatch queue — one of the best reasons to be on a plan before something breaks. Call (360) 833-3410 and we'll tell you the soonest we can be there.

Honest diagnosis, fair trip charge.

There's a flat trip charge for diagnostic service calls on existing equipment, and we tell you what it is before we come out — no surprises. If you move ahead with the repair, that charge usually rolls into the job. And we won't sell you parts you don't need: if the fix is simple, we'll do the simple fix.

Repair or replace? We'll tell you straight.

Sometimes a repair is the smart call; sometimes you're putting money into a system that's near the end. If your equipment is old and the repair is major, we'll walk you through the math honestly — see when to repair vs replace. If replacement is the better value, we'll quote that too, and you can ballpark it instantly.

Why Pacific Peak for repairs.

Our crew is direct-hire — no subcontractors — so the person who shows up is one of ours. We're licensed and bonded in Washington (Lic# PACIFPM742JC), a Mitsubishi Diamond Contractor, and an American Standard Authorized Dealer. Routine maintenance plans are also the cheapest way to avoid most repairs in the first place.

HVAC repair across the metro.

We service Camas, Battle Ground, Ridgefield, Washougal, Brush Prairie, Portland, and Gresham. See the full service area.

Common questions about HVAC repair.

For no-heat or no-cool emergencies we prioritize same-day service when our schedule allows, and Peak Care members get first priority in the dispatch queue. Call (360) 833-3410 and we'll tell you the soonest we can be out.
Yes — there's a flat trip charge for diagnostic service calls on existing equipment, and we disclose it upfront before we come out. If you go ahead with the repair, that charge usually rolls into the job. Quotes for new equipment installs are free.
We install Mitsubishi Electric and American Standard and know those lines cold, and we also diagnose and repair most other major brands of heat pumps, air conditioners, gas furnaces, and ductless mini-splits. If a repair doesn't make sense, we'll tell you straight.
It can be something simple like a tripped breaker, a dirty filter, or a thermostat setting, or something bigger like low refrigerant or a failed compressor. Our guide walks through the five most common causes from easy to expensive — or call us and we'll diagnose it.