HVAC cost estimator for Vancouver, WA.
Three questions, one real price range. Real pricing requires an in-home walkthrough, but no one should have to call five contractors to get a rough number. Pricing reflects our standard Mitsubishi or American Standard install; Ameristar value tiers run lower, premium tiers run higher.
PRICES REVIEWED AUGUST 2026
Three questions. One range.
Pricing includes equipment, labor, permits, thermostat, line-set, and commissioning. Real pricing still requires a 30-minute in-home measurement, no one should have to call five contractors to get a price range.
NO CALL · NO CREDIT CHECK · NO COMMITMENTWhat are you replacing?
How big is your home?
Efficiency level?
Typical installed costs by system and size.
These are our 2026 installed price ranges for the Vancouver, WA metro, every combination of scope, home size, and efficiency tier. Ranges reflect installed pricing including equipment, labor, line-set, permits, thermostat, and commissioning.
Heat Pump Installation
Air-source heat pump, heating and cooling in one system. All-electric. Eligible for Clark PUD rebates up to $2,500 and federal tax credits up to $2,000 on qualifying systems.
| Home size | Standard (14 SEER2) | High Efficiency (17 SEER2) | Premium Inverter (20 SEER2) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $8,800 – $11,100 | $14,000 – $17,700 | $17,700 – $22,200 |
| 1,500 – 2,500 sq ft ~3 ton | $9,200 – $11,600 | $15,200 – $19,100 | $18,800 – $23,700 |
| 2,500 – 3,500 sq ft ~4 ton | $10,300 – $12,900 | $16,400 – $20,600 | $20,100 – $25,200 |
| 3,500+ sq ft ~5 ton | $13,900 – $17,400 | $17,900 – $22,600 | $21,700 – $27,200 |
- SEER216.0
- ProfileSide-discharge
- RefrigerantR-454B
- Warranty10-yr parts
Our default recommendation: a low-profile side-discharge heat pump. The slim cabinet fits tight side-yard clearances, sheds snow better in winter, and runs quieter, all at 16 SEER2 on R-454B. Higher-efficiency 17–20 SEER2 tiers use a traditional top-discharge cabinet.
- SEER217.0
- HSPF28.5
- StagesTwo-stage
- Warranty10-yr parts
Two-stage Duration compressor runs quieter and more consistently than single-stage. Qualifies for Clark PUD rebates up to $2,500 and federal 30% tax credits.
- SEER220.5
- HSPF210.0
- StagesVariable-speed
- Warranty12-yr parts
Flagship variable-speed heat pump. AccuComfort inverter holds temperature within ½°F of setpoint. Up to 56% energy savings vs. standard. Whisper-quiet at 54 dB.
AC + Furnace (Full Split System)
Complete split-system install, new gas furnace paired with matched air conditioning condenser and evaporator coil. Traditional ducted system for homes with existing ductwork.
| Home size | Standard (14 SEER2 · 80% AFUE) | High Efficiency (17 SEER2 · 96% AFUE) | Premium (20 SEER2 · Variable-speed) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $12,600 – $15,800 | $16,800 – $21,100 | $17,700 – $22,300 |
| 1,500 – 2,500 sq ft ~3 ton | $13,100 – $16,400 | $17,600 – $22,200 | $19,000 – $23,800 |
| 2,500 – 3,500 sq ft ~4 ton | $13,900 – $17,500 | $18,800 – $23,600 | $20,100 – $25,200 |
| 3,500+ sq ft ~5 ton | $14,600 – $18,400 | $19,700 – $24,800 | $21,300 – $26,800 |
- AC SEER214.3
- Furnace AFUE80%
- BlowerMulti-speed
- Warranty10-yr parts
Paired budget-conscious system for homes with serviceable ductwork. Reliable single-stage AC and 80% AFUE furnace. Meets code, nothing fancy.
- AC SEER217.0
- Furnace AFUE96%
- BlowerVariable-speed
- Warranty10-yr parts
Two-stage AC paired with 96% AFUE variable-speed furnace. Rebate-eligible on both sides. Best total return for typical 1,500–2,500 sq ft homes in Vancouver.
- AC SEER220.5
- Furnace AFUE97.3%
- BlowerModulating
- Warranty12-yr parts
Top-tier communicating system. Modulating gas valve (40–100%) + variable-speed AC. Maximum comfort, lowest operating cost, quietest operation in the AS lineup.
Ductless Mini-Split Installation
Mitsubishi ductless mini-split, single-zone or multi-zone (1–4 indoor heads). Ideal for homes without ductwork, additions, and zoned comfort. As a Mitsubishi Diamond Contractor, our installs qualify for the 12-year extended factory warranty.
Single-zone systems
One outdoor unit paired to one indoor head. The simplest ductless setup: a single room, an addition, a garage, or a bonus room that never gets comfortable.
| System | SEER2 | Full heat down to | Installed |
|---|---|---|---|
| WX-Series Standard tier | 18.0 | – | $4,800 – $7,300 |
| HX-Series H2i Hyper-Heat | 20.0 | 5°F | $5,000 – $7,500 |
| FX-Series H2i sumo, flagship | 29.9–35 | −13°F | $7,200 – $11,700 |
Priced by number of indoor heads
One outdoor unit runs every head, and each head has its own thermostat. Cost scales with how many rooms you want to control.
| Indoor heads | Standard | H2i Hyper-Heat | H2i sumo |
|---|---|---|---|
| 2 heads 2-zone | $7,500 – $9,900 | $8,700 – $11,400 | $10,100 – $13,300 |
| 3 heads 3-zone | $9,300 – $12,300 | $11,100 – $14,700 | $13,000 – $17,100 |
| 4 heads 4-zone | $10,600 – $14,000 | $12,200 – $16,100 | $14,700 – $19,300 |
Four ways to put it in the room
A “mini-split” is really a choice of indoor unit. Every one of these runs off the same outdoor unit, so you can mix them room by room: a wall head in the bedrooms, a floor unit under a bay window, a cassette in the open living room.
High on the wall, out of the way. The one most people picture, and the one we install most.
- Capacity
- 6,000 – 36,000 BTU
- Cost per head
- Least expensive head
Sits low against the wall like a radiator. For rooms with big windows, low ceilings or no clear wall space.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- Adds ~$1,800 – $2,250
Recessed between the ceiling joists, blowing one direction. Nearly invisible. Only the grille shows.
- Capacity
- 6,000 – 18,000 BTU
- Cost per head
- Adds ~$600 – $1,350
Drops into the ceiling and blows all four directions. Best for a square, open room you want heated evenly.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- Adds ~$600 – $1,200
Cost per head is what a head of that style adds against a standard wall head of the same capacity, installed. One outdoor unit drives up to eight heads; only the MXZ-SM48NAM carries H2i Hyper-Heat, so that is the one we spec when a multi-zone job has to hold full heating capacity through a cold snap. Every head carries the 12-year Diamond warranty. If you want the equipment fully hidden with real ductwork, that is a ducted air handler rather than a mini-split. Ask and we will price it.
- SEER218.0
- HSPF28.5
- RefrigerantR-454B
- Warranty12-yr (Diamond)
Entry-tier Mitsubishi ductless. Reliable single-zone wall-mount system. 12-year warranty thanks to our Diamond Contractor status. Good for additions and single rooms.
- SEER220.0
- HSPF210.0
- Low-temp heat-5°F
- Warranty12-yr (Diamond)
Mid-tier H2i Hyper-Heat system. Maintains full heating capacity down to 5°F, ideal for Vancouver winters. Rebate-qualifying and 12-year Diamond warranty.
- SEER229.9–35.0
- HSPF211.5
- Low-temp heat-13°F
- Warranty12-yr (Diamond)
Flagship Mitsubishi inverter. One of the most efficient heat pumps on the market. Full heat down to -13°F. R-454B refrigerant. Our top ductless pick for Pacific Northwest climates.
Air Conditioning (AC Only)
Air conditioning replacement for homes with existing serviceable gas furnace. New outdoor condenser, matched evaporator coil, line-set, and commissioning.
| Home size | Good · Ameristar (14 SEER2) | Better · AS Silver 14 (14.3 SEER2) | Best · AS Gold 17 (17 SEER2) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $7,400 – $9,300 | $8,400 – $10,600 | $10,800 – $13,600 |
| 1,500 – 2,500 sq ft ~3 ton | $8,000 – $10,000 | $9,000 – $11,300 | $11,500 – $14,500 |
| 2,500 – 3,500 sq ft ~4 ton | $8,600 – $10,800 | $9,700 – $12,200 | $12,400 – $15,700 |
| 3,500+ sq ft ~5 ton | $9,200 – $11,500 | $10,400 – $13,000 | $13,300 – $16,800 |
- SEER214.0
- StagesSingle-stage
- CompressorScroll
- Warranty10-yr parts
Our value pick, Ameristar is American Standard's economy brand, built on the same parent platform. Single-stage 14 SEER2 cooling with a 10-year parts warranty. Best fit for rentals, fixed budgets, or a furnace that's still in good shape.
- SEER214.3
- StagesSingle-stage
- CoilSpine Fin
- Warranty10-yr parts
Step up to the American Standard name, Silver-series build quality, Spine Fin coil, and dealer-backed parts support over the Ameristar value line. Single-stage cooling, dependable and quiet.
- SEER217.0
- StagesTwo-stage
- CoilSpine Fin
- Warranty10-yr parts
Top of the AC lineup, two-stage compressor for quieter, more consistent cooling and the highest efficiency American Standard offers in a straight cooling condenser. Rebate-eligible and our best balance of comfort and cost.
Gas Furnace Installation
Gas furnace installation, replacement, or changeout. Code-compliant venting, proper gas sizing, clean duct transitions. 80%, 95%+, and variable-speed modulating furnace options.
| Home size | Standard (80% AFUE) | High Efficiency (95%+ AFUE) | Premium (Variable-speed modulating) |
|---|---|---|---|
| Under 1,500 sq ft 60k BTU | $6,400 – $8,000 | $8,600 – $10,900 | $9,600 – $12,000 |
| 1,500 – 2,500 sq ft 80k BTU | $6,400 – $8,100 | $8,700 – $11,000 | $10,000 – $12,600 |
| 2,500 – 3,500 sq ft 100k BTU | $6,600 – $8,300 | $9,000 – $11,300 | $10,200 – $12,900 |
| 3,500+ sq ft 120k BTU | $6,700 – $8,400 | $9,100 – $11,400 | $10,600 – $13,300 |
- AFUE80%
- StagesSingle-stage
- BlowerMulti-speed
- Warranty10-yr heat exchanger
Budget-tier single-stage gas furnace. 80% AFUE. Good choice for mild-climate installs or rental properties. Pulls a standard atmospheric vent.
- AFUE96%
- StagesTwo-stage
- BlowerVariable-speed
- Warranty20-yr heat exchanger
Two-stage 96% AFUE condensing furnace with Vortica II variable-speed blower. Direct-vent PVC flue. Best total-cost choice for Vancouver-area homes, qualifies for most rebates.
- AFUE97.3%
- StagesModulating (40-100%)
- BlowerVariable-speed
- Warranty20-yr heat exchanger
Fully modulating gas valve runs between 40–100% capacity to match demand exactly. AccuLink communicating. Quietest, most efficient AS furnace. Near-silent operation.
- Equipment (furnace, condenser, coil, line-set, thermostat)
- Labor for removal, installation, and commissioning
- All required permits and inspection fees
- Start-up, calibration, and walkthrough
- Standard-length line-set (up to 25 ft)
- Manufacturer warranty registration
- Ductwork repair or replacement
- Extended line-set runs (above 25 ft)
- Electrical service upgrades (100A → 200A)
- Gas line re-sizing or relocation
- Crawlspace or attic accessibility
- Structural modifications (platforms, pads)
Rather have a person walk it with you?
Call the office · (360) 838-5568Seen the ranges? Get your actual price at the visit.
Most contractors leave, "work up a quote," and email it days later. We don't. We walk your property, run the load calc, check ductwork, gas line, and electrical, then build your quote on the spot using our in-house pricing calculator. You see the itemized price before we leave. No waiting, no chasing us down, no mystery markups.
Ready for real numbers? Get them on-site.
Tell us about your home and we'll schedule a 30-minute site visit. During the visit we build your itemized quote on our in-house pricing calculator (equipment model numbers, labor, permit fees, warranty) you see every line before we leave. No email follow-up. No waiting days.
Schedule your same-day quote visit.
Thanks, we got your request.
We'll call you back within 24–48 hours to schedule your site visit, where we'll build and give you your quote on the spot. If it's urgent, call (360) 838-5568.
How our pricing works.
Plain-English answers to the questions homeowners ask first.
Question not answered? Get real numbers at a free visit.
Call the office · (360) 838-5568