HVAC cost estimator for Vancouver, WA.
Three questions, one real price range. Real pricing requires an in-home walkthrough, but no one should have to call five contractors to get a rough number. Pricing reflects our standard Mitsubishi or American Standard install; Ameristar value tiers run lower, premium tiers run higher.
PRICES REVIEWED AUGUST 2026
What do you need priced?
Pick one. Three quick questions, and a real installed range appears on screen.
Get your gas furnace price
Three quick questions. Your range appears on screen.
Get your furnace price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$6,400 to $13,300
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.
Which furnace?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$6,400 to $13,300 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Use the full estimator instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your heat pump price
Three quick questions. Your range appears on screen.
First, which one do you want priced?
Get your range right here.
Typical heat pump installs in Clark County run $8,800 to $27,200 installed, before rebates, depending on home size and efficiency tier. Use the full estimator for a range matched to your home.
A couple quick picks. Your range comes from the same pricing table our estimator uses, reviewed August 2026.
Which system?
Pick the closest match. Most Clark County homes go High Efficiency for the running cost.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it and we will text you to follow up. A firm written quote comes after a free 30-minute in-home visit.
Compare tiers. Tap one to switch.
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm quote comes after a free in-home visit.
We could not send your details just now. The range above still stands: call (360) 838-5568 to lock it in.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Use the full estimator instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your AC price
Three quick questions. Your range appears on screen.
First, which one do you want priced?
Get your AC price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$7,400 to $16,800
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.Which AC?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$7,400 to $16,800 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Use the full estimator instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your furnace and AC price
Three quick questions. Your range appears on screen.
Get your system price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$12,600 to $26,800
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.Which system?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$12,600 to $26,800 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Use the full estimator instead.
Every price includes
- New furnace, AC and indoor coil
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your ductless price
A few quick questions. Your range appears on screen.
Get your ductless range right here.
Ductless installs in Clark County typically run $4,800 to $19,300 installed, depending on zones and equipment tier. See the full estimator for your range.
How many zones?
A zone is one indoor head with its own remote. Count the rooms you want heated and cooled. Real installed prices, reviewed August 2026.
Zone 1 head style?
The head is the indoor unit you see in the room. All four styles heat and cool, they just mount differently.
Zone 2 head style?
Pick for this room. Mixing styles across zones is fine.
Zone 3 head style?
Pick for this room. Mixing styles across zones is fine.
Zone 4 head style?
Pick for this room. Mixing styles across zones is fine.
Your outdoor unit?
One outdoor unit runs every head. The class sets efficiency and cold weather performance.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with the quick form and it shows right here on the page. We follow up by text about your estimate, and a firm written quote comes after a free 30-minute in-home visit.
Here is your range.
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes after a free 30-minute in-home visit. Hit Back to change any answer and the range updates live.
We could not send your info just now, but your range is right here. Call (360) 838-5568 and we will lock it in.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Use the full estimator instead, no contact info needed.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Not sure what you have?
That is normal. A free 30-minute visit tells you what is in your home, what it needs, and a written quote that holds its price for 30 days. Or call and describe it, and we will point you to the right option.
Typical installed costs by system and size.
These are our 2026 installed price ranges for the Vancouver, WA metro, every combination of scope, home size, and efficiency tier. Ranges reflect installed pricing including equipment, labor, line-set, permits, thermostat, and commissioning.
Heat Pump Installation
Air-source heat pump, heating and cooling in one system. All-electric. Clark PUD lists up to $1,250 on a qualifying system replacing electric heat, but pays it only to installers in its Contractor Network, which we have not joined. The flat $900 ductless rebate has no such requirement.
| Home size | Standard (14 SEER2) | High Efficiency (17 SEER2) | Premium Inverter (20 SEER2) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $8,800 – $11,100 | $14,000 – $17,700 | $17,700 – $22,200 |
| 1,500 – 2,500 sq ft ~3 ton | $9,200 – $11,600 | $15,200 – $19,100 | $18,800 – $23,700 |
| 2,500 – 3,500 sq ft ~4 ton | $10,300 – $12,900 | $16,400 – $20,600 | $20,100 – $25,200 |
| 3,500+ sq ft ~5 ton | $13,900 – $17,400 | $17,900 – $22,600 | $21,700 – $27,200 |
- SEER216.0
- ProfileSide-discharge
- RefrigerantR-454B
- Warranty10-yr parts
Our default recommendation: a low-profile side-discharge heat pump. The slim cabinet fits tight side-yard clearances, sheds snow better in winter, and runs quieter, all at 16 SEER2 on R-454B. Higher-efficiency 17–20 SEER2 tiers use a traditional top-discharge cabinet.
- SEER217.0
- HSPF28.5
- StagesTwo-stage
- Warranty10-yr parts
Two-stage Duration compressor runs quieter and more consistently than single-stage. Clark PUD lists this at up to $1,250 when it replaces electric heat, though that rebate is paid only to Contractor Network installers, which we are not.
- SEER220.5
- HSPF210.0
- StagesVariable-speed
- Warranty12-yr parts
Flagship variable-speed heat pump. AccuComfort inverter holds temperature within ½°F of setpoint. Up to 56% energy savings vs. standard. Whisper-quiet at 54 dB.
AC + Furnace (Full Split System)
Complete split-system install, new gas furnace paired with matched air conditioning condenser and evaporator coil. Traditional ducted system for homes with existing ductwork.
| Home size | Standard (14 SEER2 · 80% AFUE) | High Efficiency (17 SEER2 · 96% AFUE) | Premium (20 SEER2 · Variable-speed) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $12,600 – $15,800 | $16,800 – $21,100 | $17,700 – $22,300 |
| 1,500 – 2,500 sq ft ~3 ton | $13,100 – $16,400 | $17,600 – $22,200 | $19,000 – $23,800 |
| 2,500 – 3,500 sq ft ~4 ton | $13,900 – $17,500 | $18,800 – $23,600 | $20,100 – $25,200 |
| 3,500+ sq ft ~5 ton | $14,600 – $18,400 | $19,700 – $24,800 | $21,300 – $26,800 |
- AC SEER214.3
- Furnace AFUE80%
- BlowerMulti-speed
- Warranty10-yr parts
Paired budget-conscious system for homes with serviceable ductwork. Reliable single-stage AC and 80% AFUE furnace. Meets code, nothing fancy.
- AC SEER217.0
- Furnace AFUE96%
- BlowerVariable-speed
- Warranty10-yr parts
Two-stage AC paired with 96% AFUE variable-speed furnace. Rebate-eligible on both sides. Best total return for typical 1,500–2,500 sq ft homes in Vancouver.
- AC SEER220.5
- Furnace AFUE97.3%
- BlowerModulating
- Warranty12-yr parts
Top-tier communicating system. Modulating gas valve (40–100%) + variable-speed AC. Maximum comfort, lowest operating cost, quietest operation in the AS lineup.
Ductless Mini-Split Installation
Mitsubishi ductless mini-split, single-zone or multi-zone (1–4 indoor heads). Ideal for homes without ductwork, additions, and zoned comfort. As a Mitsubishi Diamond Contractor, our installs qualify for the 12-year extended factory warranty.
Single-zone systems
One outdoor unit paired to one indoor head. The simplest ductless setup: a single room, an addition, a garage, or a bonus room that never gets comfortable.
| System | SEER2 | Full heat down to | Installed |
|---|---|---|---|
| WX-Series Standard tier | 18.0 | – | $4,800 – $7,300 |
| HX-Series H2i Hyper-Heat | 20.0 | 5°F | $5,000 – $7,500 |
| FX-Series H2i sumo, flagship | 29.9–35 | −13°F | $7,200 – $11,700 |
Priced by number of indoor heads
One outdoor unit runs every head, and each head has its own thermostat. Cost scales with how many rooms you want to control.
| Indoor heads | Standard | H2i Hyper-Heat | H2i sumo |
|---|---|---|---|
| 2 heads 2-zone | $7,500 – $9,900 | $8,700 – $11,400 | $10,100 – $13,300 |
| 3 heads 3-zone | $9,300 – $12,300 | $11,100 – $14,700 | $13,000 – $17,100 |
| 4 heads 4-zone | $10,600 – $14,000 | $12,200 – $16,100 | $14,700 – $19,300 |
Four ways to put it in the room
A “mini-split” is really a choice of indoor unit. Every one of these runs off the same outdoor unit, so you can mix them room by room: a wall head in the bedrooms, a floor unit under a bay window, a cassette in the open living room.
High on the wall, out of the way. The one most people picture, and the one we install most.
- Capacity
- 6,000 – 36,000 BTU
- Cost per head
- Least expensive head
Sits low against the wall like a radiator. For rooms with big windows, low ceilings or no clear wall space.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- Adds ~$1,800 – $2,250
Recessed between the ceiling joists, blowing one direction. Nearly invisible. Only the grille shows.
- Capacity
- 6,000 – 18,000 BTU
- Cost per head
- Adds ~$600 – $1,350
Drops into the ceiling and blows all four directions. Best for a square, open room you want heated evenly.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- Adds ~$600 – $1,200
Cost per head is what a head of that style adds against a standard wall head of the same capacity, installed. One outdoor unit drives up to eight heads; only the MXZ-SM48NAM carries H2i Hyper-Heat, so that is the one we spec when a multi-zone job has to hold full heating capacity through a cold snap. Every head carries the 12-year Diamond warranty. If you want the equipment fully hidden with real ductwork, that is a ducted air handler rather than a mini-split. Ask and we will price it.
- SEER218.0
- HSPF28.5
- RefrigerantR-454B
- Warranty12-yr (Diamond)
Entry-tier Mitsubishi ductless. Reliable single-zone wall-mount system. 12-year warranty thanks to our Diamond Contractor status. Good for additions and single rooms.
- SEER220.0
- HSPF210.0
- Low-temp heat-5°F
- Warranty12-yr (Diamond)
Mid-tier H2i Hyper-Heat system. Maintains full heating capacity down to 5°F, ideal for Vancouver winters. Rebate-qualifying and 12-year Diamond warranty.
- SEER229.9–35.0
- HSPF211.5
- Low-temp heat-13°F
- Warranty12-yr (Diamond)
Flagship Mitsubishi inverter. One of the most efficient heat pumps on the market. Full heat down to -13°F. R-454B refrigerant. Our top ductless pick for Pacific Northwest climates.
Air Conditioning (AC Only)
Air conditioning replacement for homes with existing serviceable gas furnace. New outdoor condenser, matched evaporator coil, line-set, and commissioning.
| Home size | Good · Ameristar (14 SEER2) | Better · AS Silver 14 (14.3 SEER2) | Best · AS Gold 17 (17 SEER2) |
|---|---|---|---|
| Under 1,500 sq ft ~2 ton | $7,400 – $9,300 | $8,400 – $10,600 | $10,800 – $13,600 |
| 1,500 – 2,500 sq ft ~3 ton | $8,000 – $10,000 | $9,000 – $11,300 | $11,500 – $14,500 |
| 2,500 – 3,500 sq ft ~4 ton | $8,600 – $10,800 | $9,700 – $12,200 | $12,400 – $15,700 |
| 3,500+ sq ft ~5 ton | $9,200 – $11,500 | $10,400 – $13,000 | $13,300 – $16,800 |
- SEER214.0
- StagesSingle-stage
- CompressorScroll
- Warranty10-yr parts
Our value pick, Ameristar is American Standard's economy brand, built on the same parent platform. Single-stage 14 SEER2 cooling with a 10-year parts warranty. Best fit for rentals, fixed budgets, or a furnace that's still in good shape.
- SEER214.3
- StagesSingle-stage
- CoilSpine Fin
- Warranty10-yr parts
Step up to the American Standard name, Silver-series build quality, Spine Fin coil, and dealer-backed parts support over the Ameristar value line. Single-stage cooling, dependable and quiet.
- SEER217.0
- StagesTwo-stage
- CoilSpine Fin
- Warranty10-yr parts
Top of the AC lineup, two-stage compressor for quieter, more consistent cooling and the highest efficiency American Standard offers in a straight cooling condenser. Rebate-eligible and our best balance of comfort and cost.
Gas Furnace Installation
Gas furnace installation, replacement, or changeout. Code-compliant venting, proper gas sizing, clean duct transitions. 80%, 95%+, and variable-speed modulating furnace options.
| Home size | Standard (80% AFUE) | High Efficiency (95%+ AFUE) | Premium (Variable-speed modulating) |
|---|---|---|---|
| Under 1,500 sq ft 60k BTU | $6,400 – $8,000 | $8,600 – $10,900 | $9,600 – $12,000 |
| 1,500 – 2,500 sq ft 80k BTU | $6,400 – $8,100 | $8,700 – $11,000 | $10,000 – $12,600 |
| 2,500 – 3,500 sq ft 100k BTU | $6,600 – $8,300 | $9,000 – $11,300 | $10,200 – $12,900 |
| 3,500+ sq ft 120k BTU | $6,700 – $8,400 | $9,100 – $11,400 | $10,600 – $13,300 |
- AFUE80%
- StagesSingle-stage
- BlowerMulti-speed
- Warranty10-yr heat exchanger
Budget-tier single-stage gas furnace. 80% AFUE. Good choice for mild-climate installs or rental properties. Pulls a standard atmospheric vent.
- AFUE96%
- StagesTwo-stage
- BlowerVariable-speed
- Warranty20-yr heat exchanger
Two-stage 96% AFUE condensing furnace with Vortica II variable-speed blower. Direct-vent PVC flue. Best total-cost choice for Vancouver-area homes, qualifies for most rebates.
- AFUE97.3%
- StagesModulating (40-100%)
- BlowerVariable-speed
- Warranty20-yr heat exchanger
Fully modulating gas valve runs between 40–100% capacity to match demand exactly. AccuLink communicating. Quietest, most efficient AS furnace. Near-silent operation.
- Equipment (furnace, condenser, coil, line-set, thermostat)
- Labor for removal, installation, and commissioning
- All required permits and inspection fees
- Start-up, calibration, and walkthrough
- Standard-length line-set (up to 25 ft)
- Manufacturer warranty registration
- Ductwork repair or replacement
- Extended line-set runs (above 25 ft)
- Electrical service upgrades (100A → 200A)
- Gas line re-sizing or relocation
- Crawlspace or attic accessibility
- Structural modifications (platforms, pads)
Rather have a person walk it with you?
Call the office · (360) 838-5568Seen the ranges? Get your actual price at the visit.
Most contractors leave, "work up a quote," and email it days later. We don't. We walk your property, run the load calc, check ductwork, gas line, and electrical, then build your quote on the spot using our in-house pricing calculator. You see the itemized price before we leave. No waiting, no chasing us down, no mystery markups.
Ready for real numbers? Get them on-site.
Tell us about your home and we'll schedule a 30-minute site visit. During the visit we build your itemized quote on our in-house pricing calculator (equipment model numbers, labor, permit fees, warranty) you see every line before we leave. No email follow-up. No waiting days.
Schedule your same-day quote visit.
Thanks, we got your request.
We'll call you back within 24–48 hours to schedule your site visit, where we'll build and give you your quote on the spot. If it's urgent, call (360) 838-5568.
How our pricing works.
Plain-English answers to the questions homeowners ask first.
Question not answered? Get real numbers at a free visit.
Call the office · (360) 838-5568