HVAC cost estimator for Vancouver, WA.
2026 installed prices in Vancouver, WA: gas furnaces $6,400–$13,300, AC $7,400–$16,800, heat pumps $8,800–$27,200, furnace + AC $12,600–$26,800 and Mitsubishi ductless $4,800–$19,300. The ranges price American Standard and Mitsubishi installs, with Ameristar as the value AC tier.
PRICES REVIEWED AUGUST 2026
What do you need priced?
Pick one. Three quick questions, and a real installed range appears on screen.
Get your gas furnace price
Three quick questions. Your range appears on screen.
Get your furnace price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$6,400 to $13,300
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.
Which furnace?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$6,400 to $13,300 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Call or text (360) 838-5568 instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your heat pump price
Three quick questions. Your range appears on screen.
First, which one do you want priced?
Get your range right here.
Typical heat pump installs in Clark County run $8,800 to $27,200 installed, before rebates, depending on home size and efficiency tier. Use the full estimator for a range matched to your home.
A couple quick picks. Your range comes from the same pricing table our estimator uses, reviewed August 2026.
Which system?
Pick the closest match.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it and we will text you to follow up. A firm written quote comes after a free 30-minute in-home visit.
Compare tiers. Tap one to switch.
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm quote comes after a free in-home visit.
We could not send your details just now. The range above still stands: call (360) 838-5568 to lock it in.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Call or text (360) 838-5568 instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your AC price
Three quick questions. Your range appears on screen.
First, which one do you want priced?
Get your AC price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$7,400 to $16,800
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.Which AC?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$7,400 to $16,800 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Call or text (360) 838-5568 instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your furnace and AC price
Three quick questions. Your range appears on screen.
Get your system price range right here.
A couple picks and your range is ready. It comes from the same pricing table our estimator uses, reviewed August 2026.
Typical installed range, Clark County
$12,600 to $26,800
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning.
Answer a couple questions in our estimator to narrow it down.Which system?
Takes about 20 seconds. Tap the tier that fits and we move on.
Home size?
Rough square footage is fine.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with your name and mobile number. A firm written quote comes from a free 30-minute in-home visit.
Typical installed range, Clark County
$12,600 to $26,800 installed
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes from a free 30-minute in-home visit.
One hiccup: your details did not reach us just now. Your range is above. Call (360) 838-5568 and we will lock it in.
Comparing systems? The full estimator covers every type we install.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Call or text (360) 838-5568 instead.
Every price includes
- New furnace, AC and indoor coil
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Get your ductless price
A few quick questions. Your range appears on screen.
Get your ductless range right here.
Ductless installs in Clark County typically run $4,800 to $19,300 installed, depending on zones and equipment tier. See the full estimator for your range.
How many zones?
A zone is one indoor head with its own remote. Count the rooms you want heated and cooled. Real installed prices, reviewed August 2026.
Zone 1 head style?
The head is the indoor unit you see in the room. All four styles heat and cool, they just mount differently.
Zone 2 head style?
Pick for this room. Mixing styles across zones is fine.
Zone 3 head style?
Pick for this room. Mixing styles across zones is fine.
Zone 4 head style?
Pick for this room. Mixing styles across zones is fine.
Your outdoor unit?
One outdoor unit runs every head. The class sets efficiency and cold weather performance.
When was it built?
A rough decade is fine. It tells us what is likely behind the walls: the ductwork, the panel, and whether the house is on electric heat.
Typical installed range, Clark County
Your installed price range is ready.
Unlock it with the quick form and it shows right here on the page. We follow up by text about your estimate, and a firm written quote comes after a free 30-minute in-home visit.
Here is your range.
Ballpark, not a quote. Includes equipment, labor, permits, and commissioning. A firm written quote comes after a free 30-minute in-home visit. Hit Back to change any answer and the range updates live.
We could not send your info just now, but your range is right here. Call (360) 838-5568 and we will lock it in.
Your price range is ready.
Where should we send it? Your ZIP confirms we cover your area.
Rather not share your number? Call or text (360) 838-5568 instead.
Every price includes
- New equipment
- Labor
- Permits and inspection
- Start-up and safety check
Want a firm number? A free 30-minute in-home visit gets you a written quote that holds its price for 30 days, only when you ask for it.
Not sure what you have?
That is normal. A free 30-minute visit tells you what is in your home, what it needs, and a written quote that holds its price for 30 days. Or call and describe it, and we will point you to the right option.
Typical installed costs by system.
Our 2026 installed price ranges for the Vancouver, WA metro, by system, including equipment, labor, line-set, permits, thermostat and commissioning. The calculator above gives the range for your home.
Heat Pump Installation
Air-source heat pump, heating and cooling in one system. All-electric. Clark PUD lists up to $1,250 on a qualifying system replacing electric heat, but pays it only to installers in its Contractor Network, which we have not joined. The flat $900 ductless rebate is for homes heated by an electric furnace or electric zonal heat.
- SEER216.0
- ProfileSide-discharge
- RefrigerantR-454B
- Warranty10-yr parts
Our default recommendation: a low-profile side-discharge heat pump. It is the American Standard Silver 16, rated up to 16 SEER2 on R-454B, and its shallow cabinet fits tight side yards and can sit under a deck or window. Our higher tiers price the Gold 17 and Platinum 20, which use a traditional top-discharge cabinet.
- SEER217.0
- HSPF28.5
- StagesMulti-speed
- Warranty10-yr parts
Multi-speed compressor that adjusts its speed to the load, for more consistent comfort than single-stage. Clark PUD's ducted heat pump rebates, up to $1,250 for replacing an electric forced-air furnace, are paid only to Contractor Network installers, which we are not.
- SEER220.5
- HSPF210.0
- StagesVariable-speed
- Warranty12-yr compressor
Flagship AccuComfort variable-speed heat pump. American Standard says it holds temperature within ½°F of the setpoint.
AC + Furnace (Full Split System)
Complete split-system install, new gas furnace paired with matched air conditioning condenser and evaporator coil. Traditional ducted system for homes with existing ductwork.
- AC SEER214.3
- Furnace AFUE80%
- BlowerMulti-speed
- Warranty10-yr parts
Paired budget-conscious system for homes with serviceable ductwork. Reliable single-stage AC and 80% AFUE furnace. Meets code, nothing fancy.
- AC SEER217.0
- Furnace AFUE96%
- BlowerVariable-speed
- Warranty10-yr parts
Multi-speed AC paired with a 96% AFUE two-stage furnace with a variable-speed blower. The furnace qualifies for Energy Trust's $800 gas furnace rebate for NW Natural customers in an owner-occupied single-family home.
- AC SEER220.5
- Furnace AFUE97.3%
- BlowerVariable-speed
- Warranty12-yr compressor
Top-tier communicating system. Modulating gas valve (40–100%) + variable-speed AC.
Ductless Mini-Split Installation
Mitsubishi ductless mini-split, single-zone or multi-zone (1–4 indoor heads). Ideal for homes without ductwork, additions, and zoned comfort. As a Mitsubishi Diamond Contractor, we register qualifying Mitsubishi systems such as the FX and Smart Multi for the 12-year extended factory warranty in owner-occupied homes (WX and HX models top out at 10 years).
Single-zone systems
One outdoor unit paired to one indoor head. The simplest ductless setup: a single room, an addition, a garage, or a bonus room that never gets comfortable.
| System | SEER2 | Heats down to |
|---|---|---|
| WX-Series Standard tier | 18.0 | 5°F |
| HX-Series Mid-tier | 20.0 | −5°F |
| FX-Series H2i sumo, flagship | 29.9–35 | −22°F |
Multi-zone systems
One outdoor unit runs every head, and each head has its own thermostat. Cost scales with how many rooms you want to control.
Four ways to put it in the room
A “mini-split” is really a choice of indoor unit. Every one of these runs off the same outdoor unit, so you can mix them room by room: a wall head in the bedrooms, a floor unit under a bay window, a cassette in the open living room.
High on the wall, out of the way. The one most people picture, and the one we install most.
- Capacity
- 6,000 – 36,000 BTU
- Cost per head
- Least expensive head
Sits low against the wall like a radiator. For rooms with big windows, low ceilings or no clear wall space.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- More than a wall head
Recessed between the ceiling joists, blowing one direction. Nearly invisible. Only the grille shows.
- Capacity
- 6,000 – 18,000 BTU
- Cost per head
- More than a wall head
Drops into the ceiling and blows all four directions. Best for a square, open room you want heated evenly.
- Capacity
- 9,000 – 18,000 BTU
- Cost per head
- More than a wall head
Our Standard and Mid-tier multi-zone systems use a ported MXZ-D outdoor unit (2 to 5 ports, one head per port). The Hyper-Heat tier uses a Smart Multi NLHZ, which drives up to eight heads; the MXZ-SM48NLHZ keeps its full 54,000 BTU/h heating output at 5°F, so that is the one we spec when a multi-zone job has to hold full heating capacity through a cold snap. Ported MXZ-D and Smart Multi systems carry Mitsubishi's 12-year parts and compressor warranty when we register them within 90 days in an owner-occupied home. If you want the equipment fully hidden with real ductwork, that is a ducted air handler rather than a mini-split. Ask and we will price it.
- SEER218.0
- HSPF28.5
- RefrigerantR-454B
- Warranty10-yr (registered)
Entry-tier Mitsubishi ductless. Reliable single-zone wall-mount system. 10-year parts and compressor warranty when registered; the 12-year Diamond Contractor term does not apply to WX. Good for additions and single rooms.
- SEER220.0
- HSPF29.5
- Low-temp heat-5°F
- Warranty10-yr (registered)
Mid-tier Mitsubishi single-zone, ENERGY STAR cold-climate certified. Keeps heating down to -5°F and still delivers about 70% of its rated heat at 5°F. Qualifies for Clark PUD's $900 ductless rebate when it replaces an electric furnace or electric zonal heat, and carries a 10-year parts and compressor warranty when registered.
- SEER229.9–35.0
- HSPF212.4
- Low-temp heat-22°F
- Warranty12-yr (Diamond)
Flagship Mitsubishi inverter. One of the most efficient heat pumps on the market. 100% heating capacity at -10°F, and it keeps heating down to -22°F. R-454B refrigerant. Our top ductless pick for Pacific Northwest climates.
Air Conditioning (AC Only)
Air conditioning replacement for homes with existing serviceable gas furnace. New outdoor condenser, matched evaporator coil, line-set, and commissioning.
- SEER214.3
- StagesSingle-stage
- CompressorScroll
- Warranty10-yr parts
Our value pick, Ameristar is American Standard's economy brand, built on the same parent platform. Single-stage 14.3 SEER2 cooling with a 10-year parts warranty. Best fit for rentals, fixed budgets, or a furnace that's still in good shape.
- SEER214.3
- StagesSingle-stage
- Warranty10-yr parts
Single-stage cooling under the American Standard name, a step up from the Ameristar value line.
- SEER217.0
- StagesMulti-speed
- Warranty10-yr parts
Top of our AC-only lineup: an inverter-driven multi-speed compressor adjusts its speed to the load, for more consistent cooling and better humidity control. American Standard's variable-speed Platinum air conditioners rate higher.
Gas Furnace Installation
Gas furnace installation, replacement, or changeout. Code-compliant venting, proper gas sizing, clean duct transitions. 80%, 95%+, and variable-speed modulating furnace options.
- AFUE80%
- StagesSingle-stage
- BlowerMulti-speed
- Warranty20-yr heat exchanger
Budget-tier single-stage gas furnace. 80% AFUE. Good choice for mild-climate installs or rental properties. Vents through a standard metal flue.
- AFUE96%
- StagesTwo-stage
- BlowerVariable-speed
- WarrantyLifetime heat exchanger
Two-stage 96% AFUE condensing furnace with Vortica II variable-speed blower. Direct-vent PVC flue. Qualifies for Energy Trust's $800 gas furnace rebate for NW Natural customers in an owner-occupied single-family home.
- AFUE97.3%
- StagesModulating (40-100%)
- BlowerVariable-speed
- WarrantyLifetime heat exchanger
Fully modulating gas valve runs between 40–100% capacity to match demand. AccuLink communicating.
- Equipment (furnace, condenser, coil, line-set, thermostat)
- Labor for removal, installation, and commissioning
- All required permits and inspection fees
- Start-up, calibration, and walkthrough
- Standard-length line-set (up to 25 ft)
- Manufacturer warranty registration
- Ductwork repair or replacement
- Extended line-set runs (above 25 ft)
- Electrical service upgrades (100A → 200A)
- Gas line re-sizing or relocation
- Crawlspace or attic accessibility
- Structural modifications (platforms, pads)
Rather have a person walk it with you?
Call the office · (360) 838-5568Already have a quote? Send it to us.
Email a photo or PDF of any heating or cooling quote to contact@pacificpeakmech.com. We call you back within 1 hour during business hours (Mon to Sat 7 AM to 7 PM), then put the comparison in writing. It's free, and you don't have to pick us.
Seen the ranges? Get your actual price at the visit.
At the visit we walk your property, run the load calc, check ductwork, gas line and electrical, then build your itemized quote on the spot with our in-house pricing calculator. You see the price before we leave.
Ready for real numbers? Get them on-site.
Tell us about your home and we'll schedule a 30-minute site visit. Your itemized quote (equipment model numbers, labor, permit fees, warranty) is built during the visit, and you see every line before we leave.
Schedule your same-day quote visit.
Thanks, we got your request.
We'll call you back within 1 hour during business hours (Mon to Sat 7 AM to 7 PM) to schedule your site visit, where we'll build and give you your quote on the spot. If it's urgent, call (360) 838-5568.
How our pricing works.
Plain-English answers to the questions homeowners ask first.
Question not answered? Get real numbers at a free visit.
Call the office · (360) 838-5568